T-8280 IR-Preheating Oven 110V/220V T8280 Preheat Plate 280270mm Infrared Pre-heating Station FOR PCB SMD BGA

Work bench size:410x316mm/16.1x12.4in Rated voltage and frequency:AC220-230v/AC110V 60/50Hz Complete machine power:1600W Preheating plate power:1500W Preheating plate size:280x270mm/11.0x10.6in Preheating plate temperature adjustable:0-450C Main Components: 1xPreheating plate main body 1xTemperature sensor 1xPCB board holder 1xPower line 1xUser manual (compact disc) 2. Operation of preheating PCB board (1) The placement and adjustment of the PCB board: According to the size of the PCB board, adjust the PCB board holder, then put the PCB board and fix the adjust knob. According to the size of PCB board and welding technological requirement, press the blue button (up)and the red button (down), regulate the output temperature of preheating plate between 0C and 450C (2) Preheating open and close: Press the "ON" button,open the preheating plate about 3-5 minutes, make the temperature be the setting value then carry on the next step . Finishing, press "OFF", the preheating plate stops working. Attention:Dont close the power switch until the machine full cooling. The preheating temperature set: If the PCB board contains lead, adjust the infrared preheating plate temperature to 100-120C; if not, adjust to 120-140C. You can also set the preheating temperature according to the users experience and technology. Cautions 1. After finishing, dont turn off the power immediately; make sure the infrared preheating plate complete cooling. 2. Keep the ventilation free-flowing, the infrared preheating plate clean, use dehydrated alcohol clean it regularly 3. The high temperature operation, pay attention, avoid scalding. 4. If you dont use the machine for a long time, youd better pull off the power source plug

• Easily operate, you can operate it through easy training.
• T-8280 can achieve to heat PCB board and component which contains lead or not,especially for the BGA and SMD parts.
• Use infrared heat, easy to cut through, heat proportion, dont have sirocco flow. Dont shift the small components on the PCB board,ensure the welding quality.
• This machine has 600W heating system, widely to 280x270mm/11.0*10.6in.Can use together with the handhold infrared welder T-835.
• This machine selects the infrared component to give off heat which independent exploration, adopts advanced PID intelligent temperature, controls temperature precisely.